CTFID is supplied with a small hardware adaptor that plugs into any USB-compliant port supported by a Windows® operating system. Once the CTFID software is loaded, the
adaptor communicates over the video signal from any Bilinxenabled camera or AutoDome. This allows service personnel to simply tap into the video cable at a convenient
location, anywhere between the camera and the monitoring station, using a simple T Connector. If Unshielded Twisted Pair (UTP) is the medium of choice, the data will still be
accessible if using passive UTP transceivers.

An installer or technician can change any or all camera/ dome settings, such as White Balance, AGC, Shutter Speed, etc., in online mode while connected to a device.
Alternately, use the offline mode by first downloading and saving the data so that is can be manipulated and uploaded to the same or other similar devices.

Whether used for large installations with lots of cameras that require only one setting to be changed, or small installations with only one camera that needs all of its settings changed, the CTFID is a time saver.